3/28/13 Spring Fling (No Pics)

Undid new spring
Removed top two leaves, top beveled, and bolt
Unbolted old spring
Hoisted frame
Undid old spring
Cleaned, assembled
Bolt too tall
Disassembled, filed down
Reassembled, tightened correctly
Started looking at brake lines

3/16/13

Severely lightened flywheel
Cut off ring gear
Don't use; good money after bad (may fail)
Set up clutch pedal
Mostly set up brake pedal
Next: 3/8" bolts in K-member (in Tardel's instructions; book?)
Build vice stand!

3/9/13

Saturday for a Change

Drilled out to 3/8" (bit by bit, 1/64" at a time) the following holes:

M/C mount
Pedal Box
All shared holes

Got clevises from Itch

Joblot hardware, if I haven't already mentioned it

Still no flywheel